Picture shows new VNWA Enclosure with VNWA and USB Printed Circuit boards.
The case is made of brushed aluminium with separate zinc-arc chassis to solder
VNWA PCB to for screening and stability.
SDR-Kits.net
DG8SAQ Vector Network Analyser Kits – Pricing & Ordering
VNWA Kit 3 – This kit contains all parts for assembling the VNWA RF Printed Circuit Board with all components required for this board but excluding enclosure. Requires PC with Parallelport/Centronics Port for operation.
USB-VNWA Interface Kit – This kit interfaces the VNWA (Kit 3) to a modern Computer (1GHz Laptop or 1.8 GHz Atom Netbook) through the USB bus through which Power, VNWA Control and Audio Signals are routed.
VNWA Enclosure - ready drilled to take VNWA Kit 3 and optional USB-VNWA Interface Printed Circuit boards - complete with front panel cover and rubber feet.
Picture shows new VNWA Enclosure with VNWA and USB Printed Circuit boards.
The case is made of brushed aluminium with separate zinc-arc chassis to solder
VNWA PCB to for screening and stability.
New! - Ready Assembled and Tested USB-Controlled VNWA is now being shipped and a 3rd batch is on order. - See Announcement here how to register your interest. Note: The VNWA Driver now supports both Windows 64 bits as well as 32 bits Operating Systems.
Pricing and Ordering Process Regret - VNWA kits out of stock until September 2010 in order to reduce backlog on Assembled VNWA waiting list.
International Orders will be accepted through Paypal All orders are subject to the SDR-Kits Ordering Terms and Contions.
Paypal accepts most payment methods including Visa and other Credit cards. Please contact me if you are purchasing more than one kit and would like to pay through international bank-transfer.
IMPORTANT: Orders for VNWA Kits will only be accepted if you accept the SDR-Kits Ordering Terms and Conditions
Please read this and indicate your acceptances in your Paypal Kit Order by including the following line in your Paypal order:
“I accept current SDR-Kits Ordering Terms and Conditions are applicable to this order” Full ordering Instructions:DG8SA
|
DG8SAQ VNWA Kits |
UK Orders incl VAT |
European Union orders |
Orders to destinations outside the EU (Taxfree - no VAT payable) |
|
USB Controlled VNWA Kit (Kit 4): Consists of VNWA Kit 3, USB-VNWA interface kit and VNWA Enclosure. Price includes Tracked “Signed for Airmail delivery” |
Regret - Out of stock until further notice |
Regret - Out of stock until further notice |
Regret - Out of stock until further notice |
|
VNWA Kit 3: contains PCB plus all parts on this PCB including semiconductors, connectors, resistors, capacitors, semi rigid coax, anti static foam mat etc . Price includes Tracked “Signed for Airmail delivery” |
Regret - Out of stock until further notice |
Regret - Out of stock until further notice |
Regret - Out of stock until further notice |
|
USB-VNWA Interface Kit: Contains PCB and all PCB mounted components plus D-sub IDC connectors for interconnection to VNWA PCB. Price includes Tracked “Signed for Airmail delivery” |
Regret - Out of stock until further notice |
Regret - Out of stock until further notice |
Regret - Out of stock until further notice |
|
VNWA Enclosure (Older type for D-connectors) |
£16.00 |
£16.00 |
£15.00 |
|
SMA Male 50 Ohm 0.25 Watt RF Termination Resistor – Use for VNWA Calibration. These are surplus items but in good condition |
£4.00 |
£4.00 |
£3.50 |
|
Coax cable RG223 length 0.17m with straight SMA male and SMA male RA connector (gold plated Rosenberger). These are surplus items - unused in new condition. Free shipping when ordered with VNWA |
£4.00 |
£4.00 |
£4.00 |
|
At request of many VNWA Users SDR-Kits is now also stocking Amphenol branded connectors. All are delivered in sealed packages. |
|||
|
SMA Plug to BNC JACK - Nickel plated body - gold plated contact - Amphenol part no 242102 |
£5.50 |
£5.50 |
£5.00 |
|
SMA Plug to N type JACK - Nickel plated body - gold plated contact - Amphenol part no 242112 |
£14.00 |
£14.00 |
£12.25 |
|
SMA Plug to SMA Plug - gold plated body - gold plated contact - Amphenol part no 132168 |
£6.50 |
£6.50 |
£5.50 |
|
SMA Jack to SMA Jack - gold plated body - gold plated contact - Amphenol part no 132169 |
£5.00 |
£5.00 |
£4.50 |
|
SMA T-Connector - SMA Jack to SMA Plug to SMA Jack - gold plated body, gold plated contacts - Amphenol part no 132217 |
£13.75 |
£13.75 |
£12.25 |
|
Other make connectors |
|||
|
SMA Male to BNC female Adapters – New - Unbranded Chinese made for light use only - |
£2.50 |
£2.50 |
£2.50 |
|
SMA 50 Ohm Male Connector - new - gold plated - Farnell - use to make your own 0 Ohm terminator or cables. |
£2.50 |
£2.50 |
£2.50 |
|
BNC Male 50 Ohm 0.25 Watt RF Termination Resistor – Use for VNWA Calibration. new. |
£1.50 |
£1.50 |
£1.50 |
|
Standard Airmail Charges for items not shipped with assembled VNWA or VNWA kit |
£1.50 |
£2.00 |
£2.50 |
|
Tracked Airmail “Signed For international Delivery” for items not shipped with the VNWA kit |
£2.00 |
£4.50 |
£4.50 |
|
Ordering Instructions To place your order and Click on Paypal and make your payment to: sdrkits @ gmail.com (remove spaces at either side of @ symbol) Please remember to include :
|
|
UK Orders may be sent by mail with payment through a cheque drawn on a UK bank and payable to J. Verduyn addressed to: Jan Verduyn, SDR-Kits, 14 Ragleth Grove, Trowbridge, Wilts, BA14 7LE |
|
Order confirmation: SDR-Kits will respond to your order by email within 4 working days after ordering by indicating the expected date of shipment of your order together with a copy of Ordering Terms and Conditions. Please save the Paypal payment email you received as invoice documentation. |
Copyright notice: The VNWA project design on this page is Copyright 2008, 2009 by DG8SAQ and SDR-Kits
Kit of parts produced by SDR-Kits with permission of DG8SAQ
Website Copyright 2008, 2009 by SDR-Kits