VNWA Accessories



Refine Search

Product Compare (0)


SMA Plug to SMA Plug - Amphenol Part no 132168

SMA Plug to SMA Plug - Amphenol Part no 132168

SMA Plug (Male) to SMA Plug (Male) connector or use as open Calibration standard50 Ohm impedance&n..

£8.25 incl VAT: £9.90

RG223 15cm Coax Cable with 1 R/A SMA plug to 1 straight SMA plug connector

RG223 15cm Coax Cable with 1 R/A SMA plug to 1 straight SMA plug connector

15 cm long Coaxial Cable fitted with 1 SMA right angle (R/A)  and 1 SMA Straight connectorRG223..

£5.75 incl VAT: £6.90

3-in-1 Trimmer Tool  for Coilpack coils

3-in-1 Trimmer Tool for Coilpack coils

Unique 3-in-1 trimming tool by Coilcraft for their range of coils With hex tip for 1/4-28 cores and ..

£1.95 incl VAT: £2.34

Nibbler Tool for Sheet Metal cutting

Nibbler Tool for Sheet Metal cutting

This tool is used by placing the cutter onto an edge and then cutting off small areas of 7mm x 3mm o..

£12.20 incl VAT: £14.64

Premium MALE SMA SOL 4 pcs Calibration Kit of 12 GHz Parts in wooden box

Premium MALE SMA SOL 4 pcs Calibration Kit of 12 GHz Parts in wooden box

4 pcs Male SMA Calibration kit by SDR-Kits in Wooden Box with Custom foam interior to store Calibrat..

£60.00 incl VAT: £72.00

RG223 20cm Coax Cable with BNC plug to SMA plug connectors (GPSDO - VNWA Ext Reference Cable)

RG223 20cm Coax Cable with BNC plug to SMA plug connectors (GPSDO - VNWA Ext Reference Cable)

20 cm long Coaxial Cable fitted with BNC Plug (Male) and SMA Plug (Male) Straight connectors on each..

£7.50 incl VAT: £9.00

RJ12 External Control Cable - VNWA 3EC only

RJ12 External Control Cable - VNWA 3EC only

3m long External Connection cable for VNWA 3ECFitted with RJ12 6 pin connectors on each end of flat ..

£6.25 incl VAT: £7.50

XTAL: 36 MHz 10 ppm Crystal  (replacement for 12 MHz Crystal in VNWA 2x kit)

XTAL: 36 MHz 10 ppm Crystal (replacement for 12 MHz Crystal in VNWA 2x kit)

36 MHz 10ppm Crystal  offered as a replacement for 12 MHz Overtone Xtal on the VNWA 2.x PCBOffe..

£0.75 incl VAT: £0.90

RG223 24cm Coax Cable with BNC plug to BNC plug connectors  (BNC Thru Calibration cable)

RG223 24cm Coax Cable with BNC plug to BNC plug connectors (BNC Thru Calibration cable)

24 cm Coaxial Cable fitted with BNC Straight Plug connectors on both endsRG223 Double screened yet F..

£7.50 incl VAT: £9.00

SMA Female End Jack connector (Jig - or replacement for VNWA TX, RX or Clock connector)

SMA Female End Jack connector (Jig - or replacement for VNWA TX, RX or Clock connector)

Quality SMA end  Jack connector used in VNWA2, VNWA3 and VNWA 3EC for TX, RX and as ext clock i..

£4.75 incl VAT: £5.70

SMA Male to SMA Female Adapter 132171

SMA Male to SMA Female Adapter 132171

Amphenol full spec 132171  SMA male to SMA female adapterUse as "VNWA Connector Saver"  - ..

£9.65 incl VAT: £11.58

SMA Plug to BNC Jack Adapter - Amphenol part no 242102

SMA Plug to BNC Jack Adapter - Amphenol part no 242102

Impedance 50 Ohms Nickel Plated Body  & Gold Plated body New in original Amphenol partn..

£8.65 incl VAT: £10.38

SMA Male 50 Ohm RF Termination 132360

SMA Male 50 Ohm RF Termination 132360

Amphenol part number 132360 Nominal Impedance 50 Ohm Load +/-1%. Gold plated body and pin Replacemen..

£3.45 incl VAT: £4.14

BNC 3-pc Male Calibration Kit fully assembled with Data

BNC 3-pc Male Calibration Kit fully assembled with Data

600 MHz BNC 3 pcs Plug (Male) Calibration kit for FA5-VA5 Analyzer Kit and DG8SAQ VNWA fitted with B..

£17.25 incl VAT: £20.70

BNC 4-pc (Male and Female) Universal Calibration Kit - assembled with Data

BNC 4-pc (Male and Female) Universal Calibration Kit - assembled with Data

600 MHz BNC 4 pcs Universal Calibration kit  for FA-VA5 Antenna Analyzer and DG8SAQ VNWA fitted..

£22.75 incl VAT: £27.30

Showing 16 to 30 of 44 (3 Pages)