Please find below our range of VNWA Packages for VNWA 3 and 3EC

Both models offer the same accuracy, measurements and range. However, the VNWA 3EC can take One Port (S11) and Two Port (S12) measurements in one sweep instead of 2 sweeps, and is also fitted with an external clock in/out connector.

The new 3SE Automatic 2 Port VNWA Models are listed here

A wide range of VNWA Accessories are available to buy separately from our Webshop.

DG8SAQ VNWA 3 and 3EC with Accessories

VNWA 3

Designed by Thomas Baier DG8SAQ, VNWA Driver and Software now runs on all recent Windows 64 bit and 32 bit Operating Systems, including Windows 11, 10, 8.1 & 8, Windows 7 and Windows Vista.

    • VNWA 3 in anodized enclosure - fully assembled and tested - Refurbished in as new condition with full warranty.

    • 3pcs Amphenol Connex Calibration Kit with VNWA Amphenol Calibration Kit information sheet

    • 20cm long SMA Plug (Male) to SMA Plug (Male) RG223  Thru Cable for thru calibration between TX and RX ports, fitted with Spinner Grips

    • Good Quality USB Cable fitted with ferrite

    • VNWA 3 "Getting Started Manual

    • 24 Month 'Return to Base' Warranty




    £199.00, incl VAT: £238.80

    Indicative prices in EURO: €232,83, incl VAT: €279,40

    Indicative prices in USD $253.83

    VNWA 3EC

    Designed by Thomas Baier DG8SAQ, VNWA Driver and Software now runs on all recent Windows 64 bit and 32 bit Operating Systems, including Windows 10, 8.1 & 8, Windows 7 and Windows Vista.

    • VNWA 3EC with fitted expansion board and external clock connector in anodized enclosure - fully assembled and tested

    • 3pcs Amphenol Connex Calibration Kit with VNWA Amphenol Calibration Kit information sheet

    • 20cm long SMA Plug (Male) to SMA Plug (Male) RG223 Thru Cable for thru calibration between TX and RX port, fitted with Spinner Grips

    • Good Quality USB Cable fitted with ferrite

    • VNWA 3EC "Getting Started Manual"

    • 24 Month 'Return to Base' Warranty



    £259.00, incl VAT: £310.80

    Indicative prices in EURO: €303,03, incl VAT: €363,64

    Indicative prices in USD $330.36

    DG8SAQ VNWA 3 and 3EC in Presentation Case

    VNWA 3EC in Presentation Case with 4pcs Calibration Kit of Amphenol Parts

    Designed by Thomas Baier DG8SAQ, VNWA Driver and Software runs on all recent Windows 64 bit and 32 bit Operating Systems, including Windows 11, 10, 8.1 & 8, Windows 7 and Windows Vista.

    • VNWA 3EC with fitted expansion board & external clock connector in anodized enclosure - fully assembled and tested

    • Presentation Storage box
    • 4 pcs SDR-Kits SMA Calibration Kit of Amphenol Connex parts supplied in natural wooden box with anodised gold-coloured aluminium nameplate containing: 

    -1 pc SMA Plug (Male) 50 Ohm load

    -1 pc SMA Plug (Male) 0 Ohm short

    -1 pc SMA Jack - Jack (Female-Female) Open connector /Adapter

    -1 pc SMA Plug - Plug (Male-Male) open connector /Adapter

    • 20 cm long SMA Plug (Male) to SMA Plug (Male) RG223 Thru Cable for thru calibration between
      TX and RX ports, fitted with Spinner Grips

    • Good Quality USB Cable fitted with ferrite core fitted for interference suppression

    • VNWA 3EC "Getting Started" booklet

    • 24 months return to base Warranty

    £289.00, incl VAT: £346.80

    Indicative prices in EURO: €338,13, incl VAT: €405,76

    Indicative prices in USD $368.62

    VNWA 3EC in Presentation Case with 4pcs Calibration Kit of Premium 12 GHz Parts

    Designed by Thomas Baier DG8SAQ, VNWA Driver and Software runs on all recent Windows 64 bit and 32 bit Operating Systems, including Windows 11, 10, 8.1 & 8, Windows 7 and Windows Vista.

    • VNWA 3EC with fitted expansion board & external clock connector in anodized enclosure - fully assembled and tested

    • Presentation Storage box
    • 4 pcs SMA SOL Calibration parts rated for use up to 12 GHz supplied in wooden box  with anodised gold-coloured aluminium nameplate containing: 

    -1 pc 50 Ohm 1 Watt Jack (female) load 
    The actual  value of the load supplied is measured and recorded by SDR-Kits on label inside the calibration box

    -1 pc 0 0hm Short Jack (female)

    -1 pc SMA Jack - Jack (Female-Female) Open connector & Adapter

    -1 pc SMA Plug - Plug (Male-Male Open) connector & Adapter

    • 20cm long SMA Plug (Male) to SMA Plug (Male) RG223 Thru Cable for thru calibration between TX and RX ports, fitted with Spinner Grips

    • Good Quality USB Cable fitted with ferrite

    • VNWA 3EC "Getting Started" booklet

    • 24 months return to base Warranty

    £325.00, incl VAT: £390.00

    Indicative prices in EURO: €380,25, incl VAT: €456,30

    Indicative prices in USD $414.54

    VNWA 3 in Presentation Case with 4pcs Calibration Kit of Amphenol Parts  Refurbished as New with full Warranty

    Designed by Thomas Baier DG8SAQ, VNWA Driver and Software runs on all recent Windows 64 bit and 32 bit Operating Systems, including Windows 11, 10, 8.1 & 8, Windows 7 and Windows Vista.

    • VNWA 3 in anodized enclosure - fully assembled and tested

    • Presentation Storage box
    • 4 pcs SDR-Kits SMA Calibration Kit of Amphenol Connex parts supplied in natural wooden box with anodised gold-coloured aluminium nameplate containing: 

    -1 pc SMA Plug (Male) 50 Ohm load

    -1 pc SMA Plug (Male) 0 Ohm short

    -1 pc SMA Jack - Jack (Female-Female) Open connector /Adapter

    -1 pc SMA Plug - Plug (Male-Male) open connector /Adapter

    • 20 cm long SMA Plug (Male) to SMA Plug (Male) RG223 Thru Cable for thru calibration between TX and RX ports, fitted with Spinner Grips

    • Good Quality USB Cable fitted with ferrite

    • VNWA 3E "Getting Started" booklet

    • 24 months 'Return to Base' Warranty

    £228.00, incl VAT: £273.60

    Indicative prices in EURO: €266,76, incl VAT: €320,11

    Indicative prices in USD $290.82