Tightening RF Connectors to recommended torque setting is highly important for obtaining repeatable VNWA measurements and optimum operational performance.
SDR-Kits is pleased to offer this SMA Torque wrench as an cost-effective solution for the RF Lab as well as for Field Staff:
Huber & Suhner Torque Wrench Model 74_Z-0-0-79
Fixed Torque setting of 0.45 Nm = 45 N cm = 4 Lb inch with 8mm/.315" open spanner
Recommended Torque setting for Brass SMA connectors
Cost-effective tool for making repeatable measurements
Supplied directly by Huber & Suhner to SDR-Kits
Matching SMA Connector Flat Spanner available to hold SMA Connectors static whilst tightening the SMA screw with Torque Spanner
SMA 8mm/.315" Torque Wrench 8mm 0.45Nm (SMA Drehmomentschluessel)
- Product Code: SMA Torque Wrench
- Availability: Out Of Stock
-
£85.00
- incl VAT: £102.00
- Indicative prices in EURO €99,45
- Indicative prices in USD $119.00
Related Products
SMA Connector Flat Spanner 8, 6, 5.5, 5mm and 5/16 Inch (Low cost Special SMA tool)
Designed and manufacturered by SDR-Kits, this low cost Flat spanner is the one tool for fitting most..
£4.68 excl VAT: £3.90
SMA Spinner Grips 2 Cable Set - Red/Black
These Spinner Grips make working with SMA connectors easier and more efficient: Apply a more constan..
£2.34 excl VAT: £1.95
SMA Spinner Grips 2 Cable Set - Yellow/Blue
These Spinner Grips make working with SMA connectors easier and more efficient: Apply a more constan..
£2.34 excl VAT: £1.95
BNC 3-pc Male Calibration Kit fully assembled with Data
600 MHz BNC 3 pcs Plug (Male) Calibration kit for FA5-VA5 Analyzer Kit and DG8SAQ VNWA fitted with B..
£13.80 excl VAT: £11.50
BNC 4-pc (Male and Female) Universal Calibration Kit - assembled with Data
600 MHz BNC 4 pcs Universal Calibration kit for FA-VA5 Antenna Analyzer and DG8SAQ VNWA fitted..
£19.02 excl VAT: £15.85
3-in-1 Trimmer Tool for Coilpack coils
Unique 3-in-1 trimming tool by Coilcraft for their range of coils With hex tip for 1/4-28 cores and ..
£2.34 excl VAT: £1.95
Magi-Cal® Automatic SMA Calibrator uses VNWA Application
A new product from the Designer of the DG8SAQ Low Cost 1.3 GHz Vector Network Analyzer, the Magi-C..
£126.00 excl VAT: £105.00
DG8SAQ USB-Controlled VNWA 3SE Automatic 2 Port VNA with SDR Kits SMA Cal Kit of Premium 12 GHz Parts
New! VNWA 3SE - Development of a solid-state 2-Port switch eliminates the need for manual reversal ..
£676.80 excl VAT: £564.00
DG8SAQ USB-Controlled VNWA 3SE Automatic 2 Port VNA with SDR-Kits 4 pcs SMA Cal Kit of Amphenol Parts
New! VNWA 3SE - Inclusion of a solid-state 2-Port switch eliminates the need for manual reversal of..
£634.80 excl VAT: £529.00
VNWA 3SE 2-Port SMA Connector Upgrade Kit for VNWA 3EC
New! SMA connector upgrade kit to 3SE Automatic 2 Port VNAThis upgrade kit is to upgrade/convert an ..
£142.80 excl VAT: £119.00
Tags: Tools