600 MHz BNC 3 pcs Plug (Male) Calibration kit for FA5-VA5 Analyzer Kit and DG8SAQ VNWA fitted with BNC Bracket Option

Offering accurate calibration up to 600 MHz - also suitable for other Test Equipment.

The kit includes the following components, all manufactured by Amphenol/

       - 1pc BNC Shorting Plug

       - 1pc BNC Open Plug

      -  1pc Calibrated 50Ω Load Plug (Male)

The BNC Load is marked with batch and serial number and is supplied with a print-out of  the measured data in the format below which may then be entered manually in the instrument setup
The print-out also provides the download link of the VNWA BNC Calibration Kit file (VNWA .ckf format) for the BNC load supplied. This file may be stored direct in the VNWA Directory DefaultCalKit  for use when the BNC Cal Kit is being used.

Please note:  Calibration of the VNWA will still be required to compensate for VNWA hardware differences.

For all kits supplied the Open Delay = - 41.66 ps and Short Delay = -113.52 ps

-------------------------------------------------------------------------

Batch B001 - s/n 0031

Male load, arbitrary VNWA model:

L = x.yy nH + 0.xx aH/Hz * f

R = 50.21 Ohm

Delay = -xxx.yy ps

Male load, arbitrary VNWA model:

-------------------------------------------------------------------------

Male load, simple VNWA model:

L = x.yy nH

C|| = 0 fF

R = 50.20 Ohm

Delay = -xxx.yy ps

-------------------------------------------------------------------------